产品系列
RSH液压放纸架
SL-1630 自动上纸机
SLH-I-1224 自动上纸机(高速)
SLH-II-1224 自动上纸机(高速)
JAP型粘箱机
产品介绍
JAP型粘箱机
功能配置及技术参数:

设备概述
全自动高速粘箱机是我公司参考美欧日等国外的机型结合我国国情经多年研制而成。本机可独立工作,也可配合印刷开槽机作高速联动线工作。
整机由智能化电脑一键式控制,输入订单后只需按下运行按钮,各组合部自动调整规格尺寸,无需人工单独调整。并有强大的记忆功能,可储存9999个生产订单,换单快,操作简便,既能适应大批量制作,又能适应小批量多品种的生产。
Automatic high speed folder gluer is researched and manufactured by our company with the combination of forign technology and our national conditions.
Complete machine is controlled by one intellectualized key. Various sections will automatic adjust size by pushing one button without manual operation. It has strong memory functoion and can store 9999 orders. Changing order quickly and operating simply so that suits large quantity running ,also a few quantity but more variety running.
一:技术指标 technical parameter
机械最高车速:300张/分钟Max. mechanical speed:?? 300 pieces/min
主电机功率Main motor power:22kw
装机容量Total power:50.8kw
整机重量Weight:20吨
全电脑控制Computer control
触摸屏输入订单,全自动调整规格Input order by touch screen, adjust spec automatically
侧压线以利折叠Side pressure line to make folding fine
真空吸附皮带输送防止纸板打滑,避免出现剪刀叉
Vacuum belt convey protect paperboard sliding to form shear fork
两侧置有成型导向轮
There are forming guiding wheels both side
进口美国VALCO喷胶系统,自动跟踪非接触、准确涂胶
Automatically tracking spray glue precisely without surface touching by spray glue system inport from VALCO USA
移动部件均有进口滚珠丝杆及直线导轨构成
Moving parts consist of ball screw and straight line rail
伺服控制堆积、输出,最高速度可达300张/分钟
Server control stacking and eject to Max. speed 300 pieces/min
可独立工作,也可配印刷开槽机
Independent running, also following printer and slotter

 

二:主要功能和配置 main function and configuration
1.进纸部:formfeed section
真空吸附前缘进纸,适合高速进纸 .
Lead edge feeder applying to high speed feeding
送纸精确,翘曲纸板均能正常运行
Feeding precisely even with warping paperboard
2.喷胶系统:spray glue system
与国际知名品牌喷胶系统供应商(VALCO)合作,确保在全世界各地都能得到良好售后服务。
Cooperate with the world famous supplier(VALCO) to ensure fine service anywhere.
美国VALCO最新一代喷胶系统,无需任何设置,自动跟踪非接触性准确涂胶。The newest spray glue system automatic apply glue precisely without surface touching and operating.
喷胶系统具有环保,无需担心漏胶或溢胶,浪费少,维护和调整更加方便等特点。environmental protection and save glue, maintenance and adjusting conveniently.
3.折叠部:folding section
折叠部前传送带由上、下输送带夹着纸板前进。进纸囗间隙可电动调节,上、下带间隙自动调节。
paperboard be run forward by former convey belts consisted of upand lower belt. The gap of entrance and up and lower belt can be adjusted automatically.
折叠部入纸段压轮采用弹簧加载,同时限位装置可单独调节每个压轮与下折叠梁间隙。
Pressure wheels of entrance are loaded by springs.
送纸折叠部机身主要由左右二个大梁及下梁构成,大小梁刚性强,稳定性好,适合于机器的高速运转。
Solid folding beams with strong rigidity and good stability suit high speed running.
为保证折叠准确,设置了侧压线装置。在二侧折叠刀囗处设计安装了针对折刀囗的侧面压线轮,以确保二次压线的绝对准确。
There are two set side pressure wheels against the folding knife to ensure folding lines precise.
折叠部后段传送带采用真空吸附带输送纸板前进以防止打滑差动形成剪刀叉。Back end convey belt with vacuum holes prevent sliding to form shear fork.
在折叠部后段装有下折叠带,速度高于真空吸附带,对纸箱折叠面进行搓动,减少剪刀差。
Lower folding belt which speed is higher than vacuum belt avoid shear fork.
在折叠部二侧装有校正轮配合折叠带实现精确折叠。
There are two set correcting wheels to ensure box square.
折叠梁左右移动采用电动调整,并可根据订单自动调整。
Folding beams move left and right automatically according orders.
4.动力部:driving section
主动力采用变频调速电机,与印刷机同步。
Frequency conversion motor runs synchronizely with printer.
所有动力均采用同步带传动,结构简单,噪音低,运行平稳,振动小。
All synchronism belts driving are structure simple, noise lower, running steady and vibrate lower.
移动部件均由进囗滚珠丝杆及直线构成。
Moving parts are imported of ball screws and straight line rail.
5.高速计数堆积输出部:high speed counting ,stacking and export section
采用光电开关精确计数。
Photoelectric sensor counting precisely
由三组伺服电机共同构成高速运行下精确计数堆积输出功能。
Three group of servo motor finish the function of precise counting ,stacking and transfering out while high speed running.
伺服控制高速分离杆确保按要求计数分堆。
Server control high speed separating bar to stack according required quantity per pile.
采用气动辅助接纸杆,使纸箱堆叠更平整。
Pneumatic assistant supporting bars make boxes stacking flat.
气动推纸机构将堆叠好的纸箱整齐排出。
Pile boxes ejected by pneumatic pushing plate in order.
强力风压装置防止从折叠部输出时纸箱上翘,保证堆叠整齐,风口方向可任意偏转。
Strong wind pressure which direction can be adjusted anywhere protect boxes bend upwards.
后挡板部根据纸板规格可前后电动(自动或手动)调整。
Backboard motorized move adjusting (automatically or manually) according box’s spec.
上下输送带将整堆纸箱同步输出。
Both up and lower convey belts transfer pile boxes together.
上输送带高度方向位置通过提升机构自动(或手动)调整,根据每捆纸箱设定张数的不同,高度相应变化.。
The height of up belt can be adjusted automatically or manually according the quantity per pile.
排出部可整体左右移动,保证纸箱始终落在机器中央。
Eject section can move to left and right to make boxes fall down on the center of table.

版权所有 上海飓尔包装机械有限公司
地址:上海市奉贤区头桥镇头桥一支路88号 电话: 86-021-57558789 传真:86-021-57558683